Arlington, VA
Roll Roofing Installation in Arlington, VA
Arlington Roofing provides roll roofing installation in Arlington for low-slope sections that don’t call for a full shingle or membrane system. Roll roofing is a practical, budget-friendly option for additions, sheds, and other low-pitch areas common on Arlington properties.
We install roll roofing across Clarendon, Ballston, and Pentagon City. Arlington’s mix of historic homes and newer additions means low-slope sections appear more often than many expect, especially on older properties with added porches or rear extensions.
What Roll Roofing Is Best For
Roll roofing works well on roofs with a slope too low for standard shingles but not flat enough to need a full membrane system like TPO or EPDM. It’s a common choice for garages, sheds, and smaller additions where a lower-cost option makes more sense than a larger commercial-grade system. It also provides reliable protection for many years when installed correctly and cared for with regular maintenance.
Standard Asphalt Roll Roofing
Asphalt roll roofing installation is the most common version we install. It uses the same base material as asphalt shingles, but in continuous rolled sheets rather than individual pieces. This makes installation faster and more affordable for smaller, low-slope areas, though it typically has a shorter lifespan than shingles or a full membrane system.
Peel and Stick vs. Torch-Down Options
Peel-and-stick roll roofing installation has become a popular modern choice because the self-adhesive backing eliminates the need for an open flame or hot adhesive. This makes it a safer option for smaller residential jobs.
Torch-down roll roofing is a different approach entirely, using heat to melt the asphalt and bond it to the roof surface. This method is more common on commercial low-slope applications and offers strong flexibility during temperature swings, which matters given how much Northern Virginia weather shifts between seasons.
Why Professional Installation Matters
Roll roofing looks simple to install, and plenty of guides online make it seem like a straightforward weekend project. In practice, proper seam sealing, correct overlap, and surface preparation all affect whether the finished roof stays watertight. A poorly sealed seam or an improperly prepped surface leads to leaks within the first year or two, often in spots that are hard to trace back to the original mistake.
We prepare the surface fully before installation, checking for any decking issues that need to be addressed first. Seams are overlapped and sealed to manufacturer specification, not just laid down and pressed into place, since that’s usually where amateur installations fail first.
Our Installation Process
We start with a full inspection of the surface and decking underneath, since roll roofing installed over damaged decking will fail regardless of how well the roofing itself is applied. Once the surface is confirmed sound, we apply adhesive or heat-bond the material depending on the product chosen, working section by section to maintain consistent overlap and a watertight seal throughout.
If your project needs a larger-scale low-slope solution rather than roll roofing, our modified bitumen system offers a more durable option for bigger commercial or residential flat sections.
Built on Real Local Experience
Arlington Roofing has installed roll roofing and other low-slope systems across Northern Virginia for more than 20 years. We’re licensed, insured, and based at 901 N Frederick St, with hands-on experience matching the right roofing system to the specific slope and use of each section we work on.
Get the Right Roofing System for Your Project
Not every low-slope section needs an expensive commercial system, and roll roofing is often the right call for smaller additions and outbuildings. Call Arlington Roofing at (877) 304-3171 for roll roofing installation in Arlington, VA.